12V Active 802.3af PoE Splitter Power Over Ethernet Adapter for Non-PoE Devices

Description

12V Active 802.3af PoE Splitter Power Over Ethernet Adapter for Non-PoE Devices.
PLUSPOE Active IEEE802.3af Poe Splitter with 12 Volts output, Power Over Ethernet for Non-PoE Devices like IP Cameras to 328 Ft from PoE Switches, 10/100Mbps
Remote Power for 12 volt 15.4w watt non-PoE devices
Extend power to 328 ft
This device is a
802.3af to 12v splitter with 2.1mm x 5.5mm DC plug and A free DC adapter 3.5 x 1.35mm
802.3af compatible for PoE switches and 48-56V PoE injectors
Power and data input via Female RJ45
Male data only output RJ45
10/100Mbps operation.
To be used with a PoE switch either 802.3af or 802.3at or Passive PoE injector
Use this Splitter to power any 12 volt non-PoE device remotely, up to 328ft from the power source.
These devices share power and data in the ethernet cable. The splitter at the camera lowers the voltage to 12 volts to operate the device.
Package Contents:
1 x 48V to 12V Active PoE Splitters with DC plug 2.1*5.5mm
1 x Free Plug adapter 3.5*1.35mm
Features & details
12 volt 15.4 watt Power over Ethernet PoE up to 328ft via Ethernet cable - requires a 48v injector or 802.3af PoE switch
Use with any PoE switch like Cisco, Netgear, etc with 10/100 speeds, Input: 44-56VDC
For outdoor Foscam, Wansview, Airsight, EasyN, Escam, Q-See, Apexis, Wanscam and other 12v non-PoE devices
DC Plug size 2.1 x 5.5mm
A free 3.5 x 1.35mm DC adapter to match more products