15V PoE Injector Power Over Ethernet Adapter Compatible as Ubiquiti POE-15-12W

Description

15V 0.8A PoE Injector Power Over Ethernet Adapter
Passive PoE
Injector
This is a special POE adapter with 15V DC out, it can not Compatible with 802.3af(48v),
Compatible Ubiquiti 15V 0.8A Power Adapter POE-15-12W
please confirm your device is using DC 12v~15v before you purchase this adapter.
If you can not figure out the voltage of your device, we suggest you to buy 48v POE adapter which can follow 802.3af agreement.
POE (Power Over Ethernet) refers to the existing Ethernet cabling infrastructure Cat. It do not make any alteration of the circumstances, for a number of IP-based terminals (such as IP telephones, wireless LAN access point AP , network cameras, etc.) to transmit data signals at the same time, but also for the provision of DC power supply such equipment technology. POE technology to ensure the safety of the existing structured cabling at the same time to ensure the normal operation of the existing network, minimizing costs.
POE is also known as the power supply system based on local area network (POL, Power over LAN) or Active Ethernet.
This Adapter only support
10/100M
connection
, do not support
gigabit ethernet connection, because Data & Power Out port using 4,5,7,8 pin as power transfer, Please do not connect any
gigabit ethernet device on "Out" port, this will damage your device.
It supplies power NO MATTER WHAT, so don't plug the "Data and Power Out" side into anything that isn't ready for it.
Compatible 15V POE device as Wireless Access Point, IP Phone, IP camera, Gateway , Switch, or More.....
Specification:
CAT5 Ethernet Pin Usage: Data: 1,2,3,6  Power: +(4,5),-(7,8)
LED: Power
Voltage Input:  AC 100-240 V 50/60Hz
Voltage Output: DC15V 0.8A(Compatible 12V~15V Device)
Netork Type: 10BASE-T, 100BASE-T
Dimension : 85 x 47 x 54mm
Weight -- 95g
Item Included:
15V 0.8A PoE Injector Power Over Ethernet Adapter x1
European plug adapter x1