-40%

5.5x2.1mm DC 5V 2.4A Active PoE Splitter Power Over Ethernet 802.3af

$ 3.95

Availability: 82 in stock
  • Country/Region of Manufacture: China
  • Condition: New
  • Brand: Unbranded

    Description

    5.5x2.1mm DC Plug Active PoE Splitter
    10/100Mbps Ethernet
    48V to 5V 2.4A (Max. 12watt)
    Compliant with IEEE802.3af
    With 2.5KV isolation
    Note:
    Notice:this POE Splitter is suitable for household IP camera with DC 5V power (as the kind in the photo of the instruction),it does not suit equipments with DC 12V power.
    Power Output Port: 5.5x2.1mm DC Power Plug
    RJ45 female INPUT Port:
    Support the IEEE 802.3af/802.3at the Power over Ethernet PoE Switch
    Support 48V Unsolicited Power Over Ethernet PoE Switch
    Support 48V Unsolicited Power Over Ethernet PoE Adapter
    Notice:
    Some managed intelligent Gigabit PoE switches need to set the LAN port of this connected splitter
    to Manual 100Mb/s mode in the management Settings of switches,
    otherwise the power supply may work normally but the network connection will not work,
    such as the following switch,
    HP 3500-48G-PoE yl Switch (J8693A)
    Specification:
    Compliant with IEEE802.3af
    Isolation: 2.5kV
    Power Input:  DC44~57V
    Power Output: DC5V 2.4A
    [inside positive (+) , outside  negative (-)]
    Data&Power INPUT Port: from RJ45 female (Compliant with IEEE802.3af/at PoE)
    Data Output Port: RJ45 Male
    Power Output Port:
    5.5x2.1mm DC Power Plug .
    Data Transfer Rate:  10/100Mbps
    Devices will be detected before poe input
    Power Pin:support both 1/2(+/-),3/6(-/+) or 4/5(+),7/8(-)
    Body size: 80 x 27x 22 mm
    DC cable length:165mm
    RJ45 Modular Plug cable length:155mm
    Weight : 55g
    Operation Temperatue:-20
    ℃ ~ 45℃
    Storage Temperature:-
    30℃ ~ 70℃
    Notice:
    Yellow LED(power) will be light up when micro USB connects to the device.
    Green LED(data) never light in any circumstances,two reasons are below,
    1.
    This splitter allows data to input and output through its RJ45 port, but no indicator on this splitter indicates the status of the data transfer.
    Only one power indicator shows the working status of the POE.
    2.due to the cost problem,the network interface component is from the universal components which own two LEDs on the market.
    Item Included:
    5.5x
    2.1m
    m DC
    48V to 5V Active PoE Splitter x1