ADTRAN OPTI-6100 TRAM3(1184532L1) REFURBISHED/TESTED, NEW FACTORY SEALED!!!!!

Description

TRAM3 (P/N 1184532L1)
The TRAM3 (Figure 56) multiplexes/demultiplexes up to 84 VT1.5s between the OMM modules
and three DS3s or EC1s terminated on rear-panel facilities.
In DS3 mode, VT1.5s (in STS-1s) can be cross-connected to/from DS1s (in DS3s), or STS-1s can
be cross-connected directly to the DS3s.
NOTE:
STS-1 and VT1.5 cross-connects can be mixed, up to 84 × VT1.5 total.
In EC1 mode, VT1.5s on the OMMs are cross-connected to the VT1.5s in EC1s.
In both modes, mapping a VT1.5 triggers a prompt to map additional VT1.5s in sequence.
The following features are supported on the TRAM3:
Monitors DS3 for LCVs, AIS, LOF, LOS, and RFI
Facility and equipment loopbacks
Optional equipment protection through redundant modules:
MX and SMX chassis offer 1:1 protection
LMX chassis offers up to 1:4 protection
DCC channels supported in DS3 mode.
Tributary timing to the OMM modules supported in DS3 mode
Operates in any chassis, from any MS slot designated for DS3/EC1 service.
For redundant operation, slot pairs/groups are as follows:
In the MX chassis: slots 1&2, 5&6, 7&8, and 11&12
In the SMX chassis: slots 1&2 and 3&4
In the LMX chassis: slots 1?5; 8?12, 13?17, and 20?24