Cambium C050900D021A ePMP 2000 Sector Antenna 5GHz 18dBi for Point to Multipoint

Description

Model: C050900D021A
Cambium Networks ePMP 2000 Sector Antenna 5GHz 18dBi for Point to Multipoint with Mounting Bracket
Cambium Networks has deployed more than five million radios around the world achieving unparalleled degrees of scalability. Based on this vast experience, Cambium Networks has designed an antenna solution that enables network operators to increase the spectral efficiency and scale of their ePMP point-to-multipoint (PMP) distribution access networks.
Wireless Service Providers deploying networks in
5 GHz
spectrum will find this sector antenna for
90°
and
120°
applications especially well-suited for high-density networks requiring frequency re-use and wide-band spectrum coverage.
Frequency Reuse:
Designed for ABAB channel re-use (two channels covering four sectors), the sector antenna has 35 Db front to back ratio including a wide aperture in the rear-facing direction.
Channel Flexibility:
Consistent gain from 4.9 to 6.0 GHz allows the operator to select a channel anywhere in the band and achieve the expected performance.
Consistent Coverage:
Excellent null fill capabilities of the antenna allow for broad geographical coverage within a sector even near the base of the tower and the edges of the sector.
Designed for the Installer:
Small compact design, integrated ePMP radio mount and GPS antenna integration.
Predictable Performance:
The sector antenna is integrated into Cambium Networks LINKPlanner. The 3D model shows coverage at all elevations and across the azimuth.
Specifications
Frequency Range: 4.9GHz to 5.97GHz
Gain: 18dBi
3 dB Beamwidth - Azimuth: 90 degrees
6 dB Beamwidth - Azimuth: 120 degrees
3 dB Beamwidth - Elevation: 6 degrees
Electrical Downtilt: -2 degrees
Polarization: Horizontal and Vertical
Port-to-Port Isolation: > -30 dB
Front-to-Front Ratio: 35 dB
Maximum Input Power: 5 W
Input Impedance: 50 ohms
Mounting Connectors: 2 x RPSMA
Mounting Hardware: Included for mounting to mast diameters 2" to 4" (5 cm to 10 cm), -10 to +5 degree tilt, Hardware included to connect ePMP access point to back of antenna body
Physical Dimensions (Antenna Body): 23.4" (H) x 6.2" (W) x 4.3" (D) (584 mm x 157 mm x 110 mm)
Physical Dimensions (with ePMP 1000 Access Point): 23.4" (H) x 6.2" (W) x 5.9" (D) (593 mm x 157 mm x 150 mm)
Weight: Antenna Body: 8.8 lbs. (4.0 Kg). With ePMP 1000 Access point and Mounting Brackets: 14.6 lbs. (6.6 Kg)
Environmental: IP65
Radome Material: UV Protected ABS
Operating Temp: -40°C to 60°C (-40°F to 140°F)