Crestron - DM-RMC-150-S | DigitalMedia 8G Fiber Receiver & Room Controller 150

Description

DigitalMedia 8G™ Fiber receiver, audio extractor, and
display controller
> Connects to a DM® switcher or transmitter over one
multimode fiber strand [1]
> Supports cable lengths up to 1000 ft (300 m) using
CresFiber® 8G, or 500 ft (150 m) using other multimode fiber [1]
> Provides one HDMI® or DVI display output [2]
> Handles video resolutions up to Full HD 1080p
> Handles computer resolutions up to WUXGA
> Handles 3D video and Deep Color
> Handles Dolby® TrueHD, DTS-HD®, and uncompressed
7.1 linear PCM audio
> Provides a stereo analog line-level audio output with
volume control [3]
> Allows extraction of stereo 2-channel audio signals [3]
> HDCP compliant
> Provides a 10/100 Ethernet LAN connection
> Enables device control via CEC, IR, RS-232, and Ethernet
> Provides two relay control ports and one contact sensing input
> Enables USB HID signal extension for a local keyboard/mouse
> Compatible with Crestron® USB over Ethernet Extenders [4]
> Allows quick, easy setup and diagnostics
> Low-profile surface mount design
> Universal power pack included
The DM-RMC-150-S provides an enhanced one-box interface solution for
a single display device as part of a complete Crestron® DigitalMedia™
system. It functions as a DM 8G® Fiber receiver and control interface,
providing a single HDMI® output and an analog audio output, plus Ethernet,
USB HID, and a variety of control ports. Its compact, low-profile design
allows the DM-RMC-150-S to be installed discreetly behind a flat panel
display or above a ceiling mounted projector. It connects to the head end
or source location using a single multimode fiber strand.
Multimedia Display Interface
A single HDMI digital AV output port is provided on the DM-RMC-150-S for
connection to a display or other device. The HDMI output can also handle
DVI signals using an appropriate adapter or interface cable[2].
A single fiber strand connects the DM-RMC-150-S to a DM switcher or
transmitter, transporting video, audio, control, and networking signals
all through one simple SC type optical connection.[1] Multiple
DM-RMC-150-Ss may be installed to handle each display in a multiroom
distribution system, all fed from a central DM-MD series switcher. Or, a
single DM-RMC-150-S can be fed straight from a DM 8G Fiber
transmitter, affording a simple solution for extending a computer or
AV signal to a single display.
Audio Extracting
The DM-RMC-150-S is equipped with an analog audio output, allowing
stereo audio signals to be extracted from the digital stream and fed to a
pair of speakers or a local sound system. The output volume is adjustable
via a control system using a keypad, touch screen, handheld remote, or
mobile device.
LAN Connectivity
Along with high-definition AV and control, DigitalMedia also integrates
high-speed Ethernet networking for a total signal distribution solution. The
DM-RMC-150-S includes a 10/100 Ethernet port, providing a convenient
LAN connection for a local network device.
USB Signal Extension
DigitalMedia allows for the routing of USB signals alongside video and
audio. A USB HID compliant mouse or keyboard can be connected directly
to the DM-RMC-150-S and used to control a computer or media server
that’s located at the central equipment cabinet or some other location.
Crestron also offers USB over Ethernet Extender Modules (USB-EXT-DM)
which may be added to enable support for more USB devices of virtually any type.
Embedded Device Control
The primary objective of every Crestron system is to enable precisely
the control desired for a seamless user experience. The DM-RMC-150-S
includes built-in RS-232, IR, and Ethernet control ports to allow
programmable control of the display device connected to it. But, it can also
provide an alternative to such conventional control methods by harnessing
the CEC (Consumer Electronics Control) signal embedded in HDMI. Through
its connection to the control system, the DM-RMC-150-S provides a
gateway for controlling the display device right through the HDMI
connection, potentially eliminating the need for any dedicated control
wires or IR emitters.
Two low-voltage relay ports are also included on the DM-RMC-150-S for
control of a projection screen or lift. In addition, there is a single digital
input port to accommodate a room occupancy sensor, power sensor, or
contact closure for enhanced automation and monitoring.
Low-Profile Installation
The DM-RMC-150-S mounts conveniently to a wall, ceiling, or other flat
surface. At just one inch deep, it fits easily behind a flat panel display or
above a ceiling-mounted projector. All connections and LED indicators are
positioned on the sides, ensuring optimal access and visibility for a clean,
serviceable installation. An array of indicators is provided for easy setup
and troubleshooting.
SPECIFICATIONS
Video
Input Signal Type: DM 8G® Fiber (DigitalMedia™ over one multimode fiber
optic strand)[1]
Output Signal Types: HDMI®, DVI[2]
Formats: DM 8G Fiber & HDMI w/Deep Color & 3D, DVI, HDCP content
protection support
Input Resolutions, Progressive: 640x480@60Hz, 720x480@60Hz
(480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz,
852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz,
1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz
(720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz,
1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz,
1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz,
1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24),
1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50),
1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz,
2048x1152@60Hz, plus any other resolution allowed by HDMI up to
165MHz pixel clock
Input Resolutions, Interlaced: 720x480@30Hz (480i), 720x576@25Hz
(576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus
any other resolution allowed by HDMI up to 165MHz pixel clock
Output Resolutions: Matched to input
Audio
Input Signal Type: DM 8G Fiber
Output Signal Types: HDMI, analog stereo[3]
Formats, HDMI: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus,
Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res,
DTS-HD Master Audio™, up to 8ch PCM
Formats, Analog: Stereo 2-Channel[3]
Digital-To-Analog Conversion: 24-bit 48 kHz
Performance (analog): Frequency Response: 20Hz to 20kHz ±0.5dB;
S/N Ratio: >95dB 20Hz to 20kHz A-weighted;
THD+N: <0.005% @ 1kHz;
Stereo Separation: >90dB
Volume Gain Range (analog): -80dB to 0dB
Communications
Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery,
full/half duplex, DHCP
USB: Supports signal extension of USB HID class devices, expandable to
support virtually any USB 1.1 or 2.0 device using Crestron USB-EXT-DM
USB over Ethernet Extenders[4]
RS-232: 2-way device control and monitoring up to 115.2k baud with
hardware and software handshaking
IR/Serial: 1-way device control via infrared up to 1.1 MHz or serial
TTL/RS-232 (0-5 Volts) up to 19.2k baud
DigitalMedia: DM 8G Fiber, HDCP, EDID, CEC, Ethernet
HDMI: HDCP, EDID, CEC
NOTE: Supports management of HDCP and EDID; supports management
of CEC between the connected HDMI device and a control system
Connectors
DIG IN: (1) 2-pin 3.5mm detachable terminal block;
Digital/contact closure sensing input;
Rated for 0-24 Volts DC, referenced to GND;
Input Impedance: 2.2k Ohms pulled up to 5 Volts DC;
Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band
HDMI OUT: (1) 19-pin Type A HDMI female;
HDMI digital video/audio output;
Also supports DVI[2]
USB HID: (1) USB Type A female;
USB 2.0 host port for connection of a mouse/keyboard or other USB HIDcompliant device
RELAY 1 – 2: (1) 4-pin 3.5mm detachable terminal block comprising (2)
normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
COM: (1) 5-pin 3.5mm detachable terminal block, bidirectional
RS-232 port;
Up to 115.2k baud, hardware and software handshaking support
IR 1 – 2: (1) 4-pin 3.5mm detachable terminal block comprising (2) IR/
Serial ports;
IR output up to 1.1 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
LAN: (1) 8-wire RJ45 female, shielded;
10Base-T/100Base-TX Ethernet port
Ground: (1) 6-32 screw, chassis ground lug
DM IN MMF/SC: (1) SC female optical fiber connector;
DM 8G Fiber input;
Connects to DM 8G Fiber output of a DM switcher, transmitter, or other DM
device via CresFiber® 8G fiber optic cable[1]
AUDIO OUT R, L: (2) RCA female;
Stereo unbalanced line-level audio output[3];
Output Level: 2 Vrms maximum;
Output Impedance: 100 Ohms nominal
24VDC 0.75A MAX: (1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input;
PW-2407WU power pack included
Controls & Indicators
HDMI OUT: (1) green LED, indicates video signal presence at the
HDMI output
LAN: (2) LEDs, green LED indicates Ethernet link status, amber LED
indicates Ethernet activity
DM IN: (1) green LED, indicates DM link status
RESET: (1) miniature recessed pushbutton, for hardware reset
SETUP: (1) red LED and (1) miniature recessed pushbutton, for
Ethernet setup
24VDC: (1) green LED, indicates operating power supplied via local
power pack
Power Requirements
Power Pack: 0.75 Amps @ 24 Volts DC;
100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 35 BTU/Hr
Enclosure
Chassis: Metal, black finish, with (2) integral mounting flanges, vented top
and bottom
Mounting: Freestanding, surface mount, or attach to a single rack rail
Dimensions
Height: 8.49 in (216 mm)
Width: 6.53 in (166 mm)
Depth: 1.07 in (28 mm)
Weight
24 oz (681 g)
Please Read:
If you bid on or “buy it now” please pay within terms.
Attention Washington State Residents:
By law we must charge Washington state sales tax based on the ship to address of the package. Please do not pay for the item until you receive an invoice from us with the sales tax.
Attention Hawaii, Puerto Rico, Alaska Residents:
Domestic shipping rates are to the lower 48 states only. Please do not pay for the item until you receive an invoice from us with the correct shipping rate.
Attention international bidders:
Please read the International Shipping section below. Be sure to provide your city and postal code or we will not be able to provide a shipping quote.
Packaging/Shipping (United States)
All items are securely packaged and shipped either UPS Ground or USPS for domestic shipments or USPS Priority/Express Mail International for international shipments.  Items will typically ship within 24 hours of receiving payment
except for weekends
. Shipment tracking number (when applicable) will be provided upon shipment. Shipping to the lower 48 states usually takes from 1-10 days depending on the location, although, 5 days is usually the average. Local pickup is available for all items, please contact us to arrange pickup, see contact info below.
Domestic shipping prices apply ONLY to the lower 48 states only.
International Shipping
Our international customers make up a large part of our business and are important to us. We understand that it can sometimes be difficult to find the gear you need and we do our best to get you that gear and at a reasonable price for both the item and the shipping cost.
NOTE:
We only ship internationally through the Ebay Global Shipping Program.
Please read and agree to the int’l shipping terms below before bidding:
•
Buyer is responsible for ALL import duties, taxes, and fees associated with the item.
•
We will not show a lower cost on international customs forms in order to reduce taxes/duty fees
•
When submitting payment it is helpful that you provide a current phone number to avoid any shipping delays. The shipping carrier may need to contact you to arrange for delivery of your package.
•
USPS Priority Mail International does not guarantee package delivery and does not include shipment tracking.
We reserve the right to only ship Express USPS International.
•
USPS Express Mail International includes guaranteed delivery and tracking.
•
Shipments
do not
include insurance unless requested and paid for.
Payment
Payment is expected within 48 hours of the end of the listing. Per eBay policy, if after 4 days payment is not received, an 'Unpaid Item Dispute'  automatically opens and the transaction might be terminated. Paypal or credit card is our preferred payment method. If you have any questions regarding payment feel free to contact us, our contact info is below. Washington State residents are subject to sales tax based on city/county of residence.
Items ship once payment is received in full.
About Us/Contact Us
Our mission is to provide the highest quality gear at the lowest prices and with the best customer service in the business. We work hard for our customers because we believe this is the only way to do business.  Quality gear at fair prices:
•
All items are fully tested before shipping unless otherwise stated
•
100% eBay feedback rating
•
Fast shipping, items typically go out within 1 day, and often times the same day
•
Excellent packaging
•
Receipt is included with package
Please contact us through the eBay messaging utility, we will do our best to respond to any questions in a timely manner!