Greenlee EK425L Gator Battery Powered Crimping Tool W/ Battery and Charger

Description

Greenlee EK425L Gator Battery Powered  Crimping Tool W/ Battery and Charger
Please look at all photos as they are of the actual item you will receive.
Everything works as it should.
Will Ship Fully Insured Through FedEx, UPS or USPS
STOCK # 12-30-21/RBZ
GREENLEE EK425L
Description
The EK425L is operated with one hand, leaving the other hand free to position the cable and connector
The crimping jaws open wide to fit easily over connectors
To help prepare for a crimp, the jaws can be jogged closed until they just grip the connector, allowing the operator to position the cable in the connector before finishing the crimp
The EK425L will complete about 325 crimps per battery charge on 4/0 AWG splices
When a crimp is fully completed, the EK425L signals the operator by automatically opening the jaws
It is then ready to make the next crimp and, when the crimping jaws need to be opened before a crimp is complete, the operator can simply push a button on the back side of the tool
Intelligent Crimping System Technology includes a pressure sensor that monitors the crimping force of each crimp and provides the operator a visual and audible alert if the force is below specifications
Specifications
Accessory : CJXPJ Crimping Jaw With Nicopress X, P, And J Die Grooves, CJB Cutting Jaw For One-Time Disposable Lock Hasps, CJ22 Crimping Jaw For Use With KC22 And KA22 Crimping Dies, KD6-27 W Style Cutter Dies For ACSR To 4/0 AWG, F020735 Kearney D Crimping Die
Battery : 18 V, 3.0 AMP-HR Lithium-Ion
Battery Charger : 120 V
Battery Charge Time : 30 Minutes
Crimp Cycle Time : Approximately 4 Seconds
Crimping Capacity : Connector 10-1/0 AWG 5/8 IN Service Entrance Connectors, 1/0-4/0 AWG 0.840 Service Entrance Connectors, 6 - 4/0 AWG Aluminum H Taps, 10-2 AWG Copper H Taps, 6-2/0 AWG Copper Tension Splices, 6-4/0 AWG All Aluminum Tension Splices, 4-1/0 AWG One Piece ACSR
Crimping Force : 6.000 TON (54.000 KN)
Estimated Cycles per Charge : Approximately 325
Handle Type : Cushioned Grip Ergonomic
Jaw : CJD3BG
Length With Jaws : 18-1/2 IN (470.000 MM)
Replacement Part : CJD3O Crimping Jaw Unit-D3 And O Die Grooves, CJD3BG Crimping Jaw Unit-D3 And BG Die Grooves, CJK Crimping Jaw Unit For Kearney O Dies, CJD3 Crimping Jaw With Single D3 Die Groove, 52176 18 V 3.0 AMP-HR Li-Ion Battery, CP1 Tool Pouch
Sub Brand : Gator
Weight With Jaws : 6.800 LB (3.000 KG)
Width Head Open : 4.000 IN (108.000 MM)
MAKITA DC18RD DUAL BATTERY CHARGER
Makita 18-Volt lithium-ion is the worlds largest cordless tool line-up powered by 18-Volt lithium-ion slide-style battery. At the heart of the LXT Series are the 18-Volt LXT lithium-ion battery and the efficient Rapid Optimum Charger. The new 18-Volt lithium-ion dual port rapid optimum charger (DC18RD) charges 2 batteries simultaneously, giving tool users unparalleled charging efficiency so their batteries spend more time working and less time sitting on the charger. The 18-Volt Dual Port Rapid Optimum Charger offers key advantages for Makita 18-Volt lithium-ion cordless tool users. The exclusive built-in fan cools the battery by forcing air through the battery's air vents during the charging process for faster charging. The charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. The result is category-leading charge times: two 18-Volt Compact lithium-ion 2.0 Ah batteries in only 25-minutes; two 18-Volt LXT lithium-ion 3.0 Ah batteries in only 30-minutes; two 18-Volt LXT lithium-ion 4.0 Ah batteries in only 40-minutes; two 18-Volt LXT lithium-ion 5.0 Ah batteries in only 45-minutes.
Charges two 18-Volt compact lithium-ion 2.0 Ah batteries in only 25-minutes
Charges two 18-Volt LXT lithium-ion 3.0 Ah batteries in only 30-minutes
Charges two 18-Volt LXT lithium-ion 4.0 Ah batteries in only 40-minutes
Charges two 18-Volt LXT lithium-ion 5.0 Ah batteries in only 45-minutes
Built-in USB port for charging portable electronic devices
Makita rapid optimum charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
Built-in fan circulates air through the battery during the charging process to cool the battery for faster charge time
Optimizes battery life by actively controlling current, voltage and temperature