Mato Tiger 1 Rc Tank Suspension Arms billet

Description

Mato Tiger 1 Rc Tank Suspension Arms.
These arms fix the problem of  loose fitting wheels, broken spindles,  and helps eliminate the tracks from derailing.
These are billet 6061 arms with a M2.5 thread.
The factory arms fit loose in the metal hull, these fit tight.  You might need to file away some casting flash in the hull bore to clear these new arms, it's just a poor casting issue and varieds greatly. There's a before/after picture of the casting of the bore  in the hull that needed to be removed.   If not removed the arm won't fit OR won't rotate freely once the 2 bolts are tightened.
On 4 of my 16 bushings that factory pressed into the wheels deformed the bore causing an oval shape hole. I'll Include a drill to clean that up. It only cleans up that rolled edge in the bushing to allow  proper fitment onto the new billet spindle.
The wheels fit tight on these spindles with very little freeplay, combined with a tighter fitment in the bearings in the hull   eliminated the tracks from derailing.
The torsion suspension bars fit tight, push them in the arms,  and install into the chassis.
Complete set of 16
Every arm was tested in my lower metal hull.
Machined on my Robodrill, not a cnc router.