Send Power Over Ethernet Cable Easy PoE - Passive POE for NON-POE devices. EP01

Description

EP01 Easy POE – Passive
2 Pcs/SET
Want to connect your access point or networked device but the power outlet is too far away and the power adapter cord is not long enough?
With Easy POE, you can connect and power your networked device approximately between100 - 130 feet away (depending on the power supply).
Specifications:
The EP01 Easy Passive PoE (Power Over Ethernet), uses unused pairs of 100base T network cable to transmit power to remote. It is a low costs and easy solution of providing power for network products which do not support Power Over Ethernet. Such as IP cameras, access points, routers, modems, switchers, embedded computer or other network devices.
Over a short distance, its usually possible to use the power adapter of the powered device such as wireless AP, IP camera, etc. The working distance normally around 30-40 meters. The real distance depends on the power supply, cable type and powered device.
Features:
Send power to remote over unused pairs of 100baseT network cable.
Including 2 units/one pair, do not include power adapter.
Working distance depends on the power supply, cable type, and powered device.
Installation View
Specifications
Ethernet Connector: RJ45
Ethernet Data Range: 10/100 Mbps
Transmission Distance: 30 ~ 40 meters
Temperature: Operation 0º to 55ºC, Storage: -20º to 80ºC
Dimensions: 69 x 25 x 22 mm
Weight: 30 g